Hey, what’s up guys it’s Rob and welcometo my tutorial for: The Ninja Star Boomerang! I spoke with Jeremy Shafer about trying to come up with a ninja adept that comesback and while each of us were trying to figure it out, we both came up with ourown designs. Mine is made from half a sheet of printer newspaper and flies likethis … while Jeremy’s is made from for origami squares and flies just like this.I’ll have a link to his tutorial at the end of the video so be sure to check itout! I’m really happy and proud of the Ninja Star Boomerang because it’s notonly easy to originate, but it flies incredibly well. Better than anyboomerang that I’ve made and has quickly become my favorite thing to make.You’regonna want to show it off to all your best friend, so be sure to give it a thumbsup down below if you do enjoy the video! So grab your piece of paper and let’smake it! For the tutorial we’re going to need half a membrane of character width printerpaper just like this which we’ll then divided up again into one-fourths and maketwo same bits which will then fit together and interlock just like theninja suns I most recommend you first try with a plain lily-white sheetbecause although it glances a little nicer with the colored paper, I found out thewhite is a little bit thinner and gusts up flying much better.We can firstly foldthe paper in half by participating in the top and aligning it with the bottom and onceit’s lined up neatly we can make a nice sharp pucker along the top with ourfingernail by move it across a couple duration andyou can either cut it or as I prefers to do time rupture it right in half. To splitthe paper into one-quarters we can do the same exact thing by folding the paper inhalf and join the edges together neatly then we can make a nice sharpcrease along the top and exactly carefully rip the paper in half.Now that we havethe paper in quarterss like the work requires, we can go on to perform the two forces andinterlock them. So, really set one of the articles aside and then we’re going totake the part and we’re going to fold it in half. So merely align the edgestogether, formerly it’s neatly aligned merely make a crease all throughout the paperand time contribute it a nice sharp-witted groove on top. Now we can take the left side and fold it across to the right side, line up thetwo ceases and precisely present it a accommodate here on the right and a tug in the middle andcrease it on the left side.Just lope your fingernail against it once and then youcould open it up so that it’s a ridge crease and that the open hems are on thebottom. Set it down and I’m just going to mark it so that you can see it a littleeasier now. Now, we are also able take the right side and we’re just going to take thistop margin and fold it down onto that vertical line give it a nice wrinkle hereand on the left side we’re just going to do the opposite so we’re gonna make thebottom and fold it up.Once we do that, we can then crease on that brand-new bend so youshould have something like this and we’re just going to flip it over andjust make sure that it’s nice and flat. These next crimps we’re going to make areimportant because it’s going to establish the flapping or the sort of littleAir Foil that we have here on each of the backstages or limbs the boomerang that helpit fly in that nice circle. We’re going to crimp this top edge down to the bottomjust like this, except we’re not going to fold it all the way. We’re going to leavea little bit of opening and as you’ll see here, I’ve made a mark and that assessment isoneeighth of an inch from the bottom.I’m giving you a measurement becauseI think you should probably try it the first time you make it just so you havean idea of about how much that is. And as you’ll see here on the ruler, an eighthof an inch is just mostly that first big increment that we have right here.Now that you know what to do we’re going to take the edge and we’re just going tofold it like this and as you’ll see the whole left side comes along. I’m justgoing to mostly course it up with that word that I drew so this whole left sideshould kind of flip and I’m going to line it up the whole way across and thenmake a nice sharp-worded crimp. Now, I’m going to just feed my fingernail against thetop. Now, we’re going to do the same on the other side so all we need to do isto flip it upside down like this and then we’re going to make this fringe righthere and we’re going to crease it down as well leaving a littlebit of space about an eighth of an inch.I’m going to eyeball at this time but ifyou want to draw the line from the bottom you can. Just take it and fold itdown like this leaving a little bit of gap and make sure that it’s parallelall the way across. Once you have it pretty even all the way on the bottom, then you can obligate that wrinkle on top and only make it a neat good pucker and makesure that you didn’t kind of pull these apart. So it should look something likethis. Now that we procreated those creases, you’ll seeon the figurehead here I have a diamond that I’m containing facing towards me whereas onthe back it’s separate where we folded those two edges.I’m going tobasically take the ends here and I’m just going to hold them like this withthe angles facing towards me I’m going to open them now I’m going to airplaneboth of the recess into this vertical text just like this. So precisely fold itdirectly on that horizontal line now and make a crease and then do the same onthe left side.As you’ll construe, because the left side is thinner it makes a smallertriangle but we both demand these top peripheries immediately on the middle-of-the-road just likethat. Then you can reclose the two edges together and precisely pinch it and make acrease do the same on the other side. Just nursed it like this open it up andjust airplane these recess instantly on to the center and then reclose it so itshould look something like this.Now all we need to do now is basically time foldthese weapons in a little bit it’s not critically important where it is usuallyright around this little point or corner that you experience right here. So I’m justgoing to take it and just fold it like this and you’ll feel some resistance soright when you feel some resistance right around there is good and we’rejust going to make sure that this outside edge is aligned with this one onthe bottom so formerly they’re lined up like this. Then you could just give it a goodpinch. Then you can developed it and you can dothe same with the left side so just take it like this and time promote it up andfold it across and when you feel some resistance, right around this reces now, then all you need to do is to only thread it up and merely pass it a pinch.And thereyou go! That’s how to make one of the bits. Now that we’ve finished the firstpiece, the second piece is stimulated the same exact direction. So if you need to you canrewatch the time that I’ve set out below and when you’re done we’re ready tointerlock the two sections together. Alright people, all that’s left now is tointerlock the two cases together and as you’ll experience I’m comprising them so that thediamonds are facing me on the right side. I proceeded a line from the top of thediamond to the bottom and on the left side I proceeded one from the left to theright. We’re basically just going to take the one on the right and turn it 90 stages and situated it on top of the one on the left. And if you can see, you’re just going to basically overlap the diamonds by kindof putting them right in the middle and sort of overlapping the lines just likethat.So right around there is good. I’m goingto start with the top forearm and we’re going to fold it down and we’re going togo in a clockwise direction. So that’s one, then we go now that’s two. Youcan move these around if you need to because they are going to startoverlapping. So now we go this is three. As you’ll see if it gets a littlescrunched up then you really can move move it around like this. Shift this down thelast one here is going to go over this one the third one and underneath thefirst one kind of under here.So what I’m going to do is hold it now and I’mgoing to lift up the first one by only attracting it out like this. I’m gonnapinch it right here and I’m going to make the last arm and merely round it offa little bit and then I’m going to stick the pitch right into that opening rightthere and I’m going to gather it through. Now, when you attract these through you wantto make sure that they go up to the bends that you kind of established before. Soyou want to reach up the first one that you plucked out just like this kind ofpush it in. While you’re prod in the other oneslike this and make sure that it’s nice and flat in the middle. You can kind of tugboat on the opposite ones a little bit like this, and there you go! You’ll see it will come together sort of like that. So time make sure it’s niceand flat in the middle once you get it all interlocked. Then all we need to do is basically take this littleoverlap this little flap and we’re going to fold it right along this hem so justtake it and fold it right the whole way down I’m going to set it down on thetable because it’s a little easier for me.Just gonna take the edge and fold itall the way down on there as you’ll notice when you do that it doesn’t wantto fold in the area now, that’s okay. You merely need to leave it a little bitcurved. So really press it like that right in the angle then justrotate it fold this one down now the whole way. Then the next one fold it down andjust walk my digit up right there and then finally we’ll do the last one.There you go there is your ninja star boomerang. Now what I like to do is tojust run my fingernail over all of the wrinkles peculiarly these right here youwant to make sure it’s nice and flat. So exactly press it down like this upside downand you’re ready to throw it! I’m going to hold the boomerang so that the fourinterlocked cartons are facing the left side with the air foils and my pointerand centre paw are grabbing one of the arms just like this close to the end.I’m going to rest the other arm of the boomerang on my palmright near my thumb like this, and I’m going to basically curl my wrist and I’mgoing to flick it out like that like I would with a yoyo.You could do itdirectly out but I also recommend you can do it up like this at like atwenty or thirty degree angle. Alright so I’m just gonna basically go like thisand flick my wrist really hard and exhaust the boomerang. Okay so let’s giveit a shot! Thank you guys so much for watching mytutorial for my allnew Ninja Star Boomerang designing if you did like itdon’t forget to give it a thumbs up down below and if you’re not alreadysubscribed click that subscribe and notification bell so that you know whenI come out with a new video.To check out Jeremy’s tutorial for his boomerang youcan click this little card here in the upper right and I’ll place the link inthe video description below. After you shed the ninja star boomerang a coupletimes you might notice it starts to get a little bent or it might not come backas well. What you need to do after every duet throws is just flatten it out andreinforce the wrinkles to make it flight great again. If you find when you throwthe boomerang that it thumps the field or it doesn’t come back all the way or evenif it shoots off in the other direction what you can do is hold these four boxeson the bottom and tilt the backstages up like this ever so slightly and you shouldnotice that the boomerang will come back a little better.With some rehearsal, propelling and catching it you’ll obviously become a ninja star boomerangpro in no time. As ever thanks so much better for the carry I’ll see you soon !.